Is it intended that shaping repair uses identical repair commands and tools to blacksmithing/armorsmithing/weaponsmithing (with a wire brush and oil)?
I have all 3 shaping repair techs. I don't have the 3rd and final extended protection repair techs for outfitting or forging so I donno if there's a message for extended protection but I didn't see that messaging for shaping. Is wood rejuvation a silent and automatic protection?
Gently you begin rubbing the wire-bristled brush along the surface of the battle bow.
Swipe after swipe removes substantial amounts of grime and debris from the bow. Using steady strokes you bring the material's surface to a smooth finish.
Roundtime: 9 sec.
You pour a small amount of the oil onto the battle bow and work it in using a cloth. Wiping away the excess, you have completed the repair work.
Roundtime: 15 sec.
Vote:
http://www.topmudsites.com/vote-DragonRealms.html
Shaping repair on 06/23/2015 12:28 AM CDT
Re: Shaping repair on 06/23/2015 12:56 AM CDT
Re: Shaping repair on 06/23/2015 08:31 PM CDT
>>Is it intended that shaping repair uses identical repair commands and tools to blacksmithing/armorsmithing/weaponsmithing (with a wire brush and oil)?
For now, yes. I ran out of time to write custom mechanics for wood without delaying everything another month or two.
"I have no data yet. It is a capital mistake to theorize before one has data. Insensibly one begins to twist facts to suit theories instead of theories to suit facts."
- Sir Arthur Conan Doyle, Sherlock Holmes
For now, yes. I ran out of time to write custom mechanics for wood without delaying everything another month or two.
"I have no data yet. It is a capital mistake to theorize before one has data. Insensibly one begins to twist facts to suit theories instead of theories to suit facts."
- Sir Arthur Conan Doyle, Sherlock Holmes
Re: Shaping repair on 07/10/2015 10:32 AM CDT
I'm attempting to repair my longbow and I have all three techs, Wood Maintenance, Wood Repair, and Wood Rejuvenation, but when I rub/clean/scrape my longbow with the iron wire brush I bought from the Forging Society I am getting Forging experience, which is very low at 17, and I'm destroying my bow and getting 40+ second RTs. I've got 343 Engineering, so I should have no problems repairing and should be getting much shorter RTs.
Am I doing something wrong? I've looked through the Master Shaping Book and I can't find any instructions for repair so I'm not positive I'm doing it correctly.
Am I doing something wrong? I've looked through the Master Shaping Book and I can't find any instructions for repair so I'm not positive I'm doing it correctly.